New DIY in 2017

New DIY in 2017

Matrix II Homemade Analog Synthesizer

Published on Nov 17, 2017 Sbranvlztronics

"Matrix II Homemade Analog Synthesizer brief description, showing the front panel with its 64 potentiometers, 100 jacks patch matrix, and listing the 24 modules.

3 VCOs, 4 dual VCAs, 2 moog ladder VCFs, 2 LFOs, 3 ADSRs, VC Phaser, VC Delay, Divider, Sample & Hold, CV Lag, 2 Inverters, 4 channel mixer, Ring Modulator, Noise generator,

Welcome to



PULScar - Waldorf Pulse + OSCar DIY Hybrid by Stereoping

CBD Computer Drums - ft. SDS8,TQ-5,JX-03,K4,PULScar

Published on Nov 15, 2017 Stereoping

Note the focus of this video from Stereoping is on his midified CRB Computer Drums. What caught my attention though was his PULScar mentioned in the second paragraph below.

"Rough testsong for a midified CRB Computer Drums. The digital part or this rare drumcomputer was completely broken and ripped off to



Rakit Disintigrated Cracklebox

Published on Nov 2, 2017 Rakit

"A fun little noisemaker kit based on the famous cracklebox synth."

via Rakit

"Our disintegrated cracklebox kit is inspired by Michel Waisvisz’s Cracklebox and his use (and abuse) of one of the earliest examples of an integrated operational amplifier. The original used the LM709, an old (and obsolete) chip by today’s standards. So in our kit we have effectively



DIY Virtual analog synthesizer

Published on Nov 12, 2017 devoxxxide

"Nord Drumみたいなのが作りたかった"

"I wanted to make it like Nord Drum"



Machines In Music 2017 - Bubblesound

Published on Nov 11, 2017 Thonk Synth DIY

"David from Bubblesound takes us through the current range of DIY kits and also introduces us to 5 brand new kits coming soon: Pan, 141 ADSR, VCOb, SEM20 & uLFO.

Buy Bubblesound DIY kits on Thonk here - https://www.thonk.co.uk/shop/bubbleso..."



New North Coast Synthesis MSK 010 Fixed Sine Bank

via North Coast Synthesis Ltd.

"Everywhere A Sine

Never run out of modulation sources again. With the MSK 010 you get eight fixed-frequency LFOs with nice smooth sine waveforms in 8HP, which is one of the best LFO to HP ratios in the Eurorack world.

The MSK 010's Wien-bridge oscillator cores produce low-frequency sine waves natively, in a fully analog way with a minimum of harmonic distortion



New North Coast Synthesis MSK 008 Dual VC Octave Switch

via North Coast Synthesis Ltd.

"Master of Melodies

The MSK 008 Voltage-Controlled Octave Switch is a multifunction voltage processor. The module has two channels, each containing a whole-volt quantizer that maps its input to the nearest integer number of volts from -2 to +2; a three-position toggle switch that shifts the quantizer boundaries up or down by a volt; and a precision adder (with



New North Coast Synthesis MSK 007 Leapfrog VCF

And we have a new maker featured on the site.

via North Coast Synthesis Ltd.

"Not Your Grandmother's Synth Filter (Yet)

There are hundreds of analog synthesizer VCFs, but only a few core designs. You've got your Moog transistor ladder and imitators that use diodes or other substitutes; you've got your two-pole state variable filter, maybe cascaded to get additional poles; and that's about it.



DIY Project #8: Minty Synth 2.0

Published on Nov 4, 2017 poorness studios

"The Minty Synth is a tiny Arduino-bases synthesizer built inside of a mint tin. It's very powerful for how simple it is to build. You can buy one here: https://www.adafruit.com/product/2648"

"The MintySynth kit - 2.0 is a great way to make your next musical creation while experimenting with electronics and programming. Open source and hackable, the



DinSync Announces New Gilbert CV/Gate Voice DIY Project

via the re303 forum:

"Gilbert is a new DIY project I'm working on, and will eventually be available in the re303 shop as a full kit.

The first prototype has been made and is working. The idea here is a small cv/gate voice you can build and use with your re303 (or any other cv/gate sequencer of course)

The architecture is inspired largely by the mc202, sh101 and sh09. So it sounds somewhat



Treat Yourself :)

null